New 536D Draper

Specifications

Cutterbar - Type	SCH® Easy Cut with roller guides, spring steep guards, and bolted sections Standard: dual knife
Cut width (length)	11 m 36 ft
Reel type	Hydraulic
Fingers	Plastic
Belt width	V-guided draper belt: 106.7 cm 42 in.
Platform length
Overall operating depth
Transport width, field position
Transport width on wheel, less dividers
Transport length, hitch extended	12.5 m 40.8 ft

Type	SCH® Easy Cut with roller guides, spring steep guards, and bolted sections Standard: dual knife
Cut width (length)	11 m 36 ft
Knife drive	Two hydraulic motors and two knife drives
Knife speed	1,100 to 1,440 spm
Stroke length	84 mm 3.3 in.
Cutterbar tilt	Hydraulic, adjustable from cab

Reel type	Hydraulic
Number of bats	Six
Fingers	Plastic
Diameter	1118 mm 44 in.
Height control	Hydraulic, adjustable from cab
Speed control	Hydro handle, in cab
Reel lift	Hydraulic, adjustable from cab
Reel fore and aft	Hydraulic, adjustable from cab
Reel resume
Reel reverse
Operating speeds
Operating speeds (54-inch reel)

Belt width	V-guided draper belt: 106.7 cm 42 in.
Delivery opening width	Delivery, double swath opening: 137.2 cm 54 in. Delivery, single swath opening: 203.2 cm 80 in.
Delivery opening height	205.7 cm 81 in.
Cleat height
Draper drive	Two hydraulic motors
Operating speed	0 to 232 m/min 0 to 760 fpm
Speed control	Adjustable in windrower cab
Remote canvas speed control	Standard
Deck tilt	Standard
Deck extensions	Optional, dealer-installed deck extensions: 35.6 cm 14 in.

Type
Header height sensing on the ground
Header height sensing off the ground

Type	Optional: factory-installed cross-pea auger

Platform length
Overall operating depth
Operating width (field)	11 m 36 ft
Transport width (reel fully retracted)	2.6 m 8.5 ft
Transport width, field position
Transport width on wheel, less dividers
Transport height	2.44 m 8 ft
Transport length, hitch extended	12.5 m 40.8 ft

Approximate weight (base platform without reel)	1458 kg 4852 lb
Approximate weight (base platform with reel)	3207 kg 7070 lb
Approximate weight (with transport)

Center opening width between belts
Back sheet opening
Deck shift / double windrow capability (manual / hydraulic / not available)

Gauge wheels	Adjustable castoring gauge wheel optional
Integrated slow speed transport system	Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table