Compact Utility Tractors
Residential
Agriculture
Compact Construction
Landscaping & Grounds Care
Golf & Sports Turf
Additional Dealer Supported Products
All Used Equipment
For parking the 500E Loader.
The 500E loader is designed to be a rigid mounted loader to help be affordable as well as close to tractor for improved maneuverability and visibility.
If an upgrade is needed to allow for loader removal, the parking stand and coupler kit is available.
Once this kit is installed, it will have integrated parking stands and couplers to allow customer ease of removal.
The John Deere quick-change attachment carrier allows one person to quickly change attachments without the use of tools.
With the bucket level or slightly rolled back, simply remove the retaining pins and place in storage position.
Roll the attachment forward to disengage the lower pins.
Lower the attachment to the ground to disengage the top hooks.
Back away.
To install another attachment simply reverse these steps.
Compare >>>
Select up to 2 models to compare specifications
An optional bucket level indicator is available to enable the operator to determine the bucket position from the seat and adjust as required. This aides when scooping into dirt or gravel piles as well as other tasks such as pallet fork or bale spear work.
General Purpose (GP) buckets
General purpose (GP) buckets
The brush guard is designed for operators who require added protection against debris from damaging the expensive-to-replace front grille or lights.
NOTE: Not compatible with front hitch.
The basic functions of the hood guard are:
It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.
The hood guard is highly recommended for 5103, 5203, 5303, 5105, 5205, 5200, 5210, 5220, 5300, 5400, 5400N, 5403, 5310, 5310N, 5320, and 5320N Tractors. The basic function is to:
It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.
Allows using non-John Deere, specialized attachments with 512, 522, 542, 553, and 563 Loaders.
General Purpose (GP) buckets:
Large ballast box is available to carry additional ballast for greater tractor stability.
Capacities
Weight
Sand (Dry)
Concrete
Portland Cement
BW15852 Large ballast box:
13.3 ft3 = 377L
Material
581 kg (1277 lb)
871 kg (1915 lb)
1089 kg (2395 lb)
Empty box
155 kg (342 lb)
Total
736 kg (1619 lb)
1026 kg (2257 lb)
1244 kg (2737 lb)
BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.
See ''Rear Ballast Requirements'' for proper ballasting of the tractor.
For parking the 512 Loader.
To see instructions on how to park the loader using the stands, go to parking stand section.
Mounting frame plates and parts are shown in light blue.
Monthly Loan Payment:
Interest Paid:
Total of principal plus Interest:
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
All fields marked with * are required.
Your email has been succesfully sent.
See our current job openings