New AP10 Series Pallet Fork

Hitch bar (1), adjustment holes (2), clevis (3)

The hitch can be set to work directly behind the tractor or offset to the right or left, which is ideal for orchards or vineyards.

Moving the tongue on the hitch bar (1) provides a course adjustment.

Changing the angle of the hitch tongue, through a series of holes (2), fine-tunes adjustments.

The clevis (3) can be assembled so a disk harrow can be used with tractors having either a straight or open-type drawbar.

A safety chain and hose support are included in base equipment.

Blade spacing

Blade spacing

The 225 Disk is available in 229-mm (9-in.) blade spacing, and the 425 Disk is available with 229-mm (9-in.) or 279-mm (11-in.) blade spacing.

Blade spacing recommendations for best performance are as follows:

Blade choices

Blade shapes (cone, spherical, solid, cutout)

Cone-type or spherical blades are available in a variety of sizes with a solid or cutout design.

• 559-mm (22-in.) or 610-mm (24-in.) diameter solid or cutout design on 225 Disk
• 610-mm (24-in.) or 661-mm (26-in.) diameter solid or cutout design on 425 Disk

Blade tapers and furrow filler

Right rear gang is tapered and includes two smaller disks to feather the soil.

Reduced furrow filler blade

A 356-mm (14-in.) diameter furrow filler (arrow) is available to further smooth and level the soil.

A scraper is included with the furrow filler.

425 Offset Disk

The mainframe on 225 and 425 Offset Disks is made of one-piece, heavy, structural steel tubing to resist torsional forces on the frame:

• 102 mm x 102 mm x 5 mm (4 in. x 4 in. x 3/16 in.) on the 225 Offset Disk
• 76 mm x 127 mm x 10 mm (3 in. x 5 in. x 3/8 in.) on the 425 Offset Disk